Screen Painter Report Size - Avaya Call Management System Custom Reports

Shift+Tab
Back Space
Ctrl+f
Ctrl+b
Ctrl+d
Ctrl+u

Screen Painter report size

Screen Painter allows you to create a report design with maximum dimensions as follows:
A horizontal size of 132 columns (character spaces)
A vertical size of 25 lines
For most terminals, CMS displays (in the lower right border of Screen Painter) the exact
position of the cursor within Screen Painter's 25 column by 132 column grid (see the
following figure). However, because the interior of Screen Painter window is only 54
columns wide and 20 lines high, you may need to scroll Screen Painter horizontally or
vertically to access areas that do not fit within the window.
Note:
Press and hold Shift; then press Tab. This key
combination moves the cursor eight spaces to the left.
You can also use Shift+Tab when you are defining
blocks (see the
this chapter).
The
some terminals.
Moves the cursor one space to the left.
(Forward) Moves the cursor to the far right edge (132nd
column) of Screen Painter.
(Back) Moves the cursor to the left edge (1st column) of
Screen Painter.
(Down) Moves the cursor to the bottom (Line 25) of
Screen Painter.
(Up) Moves the cursor to the top (Line 1) of Screen
Painter.
The widest custom report that you can display on your terminal without
scrolling is 78 columns wide. The terminal actually displays 80 columns, but
the side borders of the report window use two of the columns.
"Editing a report with
Shift+Tab combination may not be available on
Note:
Throughout this document, when any
set of two keys are shown side by side,
press an hold the first key. Then press
the second key.
Navigating Screen Painter
blocks" section in
Issue 3.0 May 2002 43