Define Custom; Diagnostic Test - Visonic PowerMaxExpress Installer's Manual

* Upon selecting any one of the 3 options (zone a, b and c) you may enter a zone number and then select "disable", "turn on", "turn
off", "pulse active" or "toggle".
The currently saved option is displayed with a dark box at the right side. To review the options, repeatedly click
**
until the desired option is displayed, then click

4.9 DEFINE CUSTOM

This mode allows you to define up to 5 zones names (in addition to the zone names that can be defined in the DEFINE ZONES
mode - see par. 4.3).
(see figure 4.1a)
9. DEFINE CUSTOM
I OK
CUST. ZONES NAME
<OK> TO EXIT

4.10 DIAGNOSTIC TEST

This mode allows you to test the function of all protected
area wireless sensors / wireless sirens / wireless keypads /
GPRS / LAN connection / options for resetting the
Broadband Module and to receive / review information
regarding the received signal strength.
26
EDIT USER TERM 1 EDIT USER TERM 2
I OK
To edit User Terms, use the following buttons on the control panel keypad:
press
press
Figure 4.9 – Define Custom
(a dark box will be displayed at the right side).
Figure 4.8 Define PGM
EDIT USER TERM 3
to scroll backward; press
to change from small caps to big caps ; press
The diagnostic test process is shown in figure 4.10.
For WL Sensors / WL Sirens / WL Keypads:
Three reception levels are sensed and reported.
EDIT USER TERM 4
to scroll forward ;
for space
D-303973 PowerMaxExpress Installer's Guide
button
EDIT USER TERM 5