Table of Contents
Advertisement
or
ACK].
7.
Press
and make the selection and then press
I
OK
The PowerMax10-G2 display will revert to [31:LOW-BAT.ACK].
You can now press the
"
" or press the
DEFINE PANEL
4.10 DEFINE CUSTOM LOCATIONS
This mode allows you to define up to 5 locations (in addition to the locations that can be defined in the ZONES / DEVICES
mode - see par. 4.4).
To Define Custom Locations
1.
Make sure the system is disarmed and then press the
repeatedly until the PowerMax10-G2 display reads "INSTALLER MODE".
2.
When the PowerMax10-G2 display reads [INSTALLER MODE], press
The screen will now prompt you to enter your installer code.
Enter your Installer Code.
3.
The PowerMax10-G2 display will read [NEW INSTL CODE].
4.
When the PowerMax10-G2 display reads [NEW INSTL CODE] press the
or
button repeatedly until the PowerMax10-G2 display will read
[DEFINE CUSTOM].
5.
Press the
button.
I
OK
The PowerMax10-G2 display will read [CUST. ZONES NAME].
When the PowerMax10-G2 display reads [CUST. ZONES NAME], press the
6.
button.
I
OK
The PowerMax10-G2 display will read [EDIT USER TERM 1].
7.
Press the
button. The PowerMax10-G2 display will read [Custom 1].
I
OK
Note: The table at the end of this section provides a list of the keys used by the
PowerMax10-G2 editor.
8.
Press the
button to confirm the location definition.
I
OK
Press the
] - –
TERM 2
EDIT USER TERM 5
Pressing the
you to "
<OK> TO EXIT
Key
Functionality
Moves the cursor from left to right.
Long press for speed.
Moves the cursor from right to left.
Long press for speed.
Scrolls upward the sequence of inserted digits.
Long press for speed.
Scrolls downward the sequence of inserted digits.
D-302756
button repeatedly until the display will read [31:LOW-BAT
or
button to program any other menu in
button to take you to "
or
button and repeat the procedure for [
], as required.
or
buttons at any stage in the procedure will take
".
to confirm.
I
OK
".
<OK> TO EXIT
button
.
I
OK
EDIT USER
31:LOW-BAT ACK
I
OK
SELECT OPTION
I
OK
31:LOW-BAT ACK
READY 00:00
INSTALLER MODE
I
OK
ENTER CODE:
CODE
NEW INSTL CODE
or
DEFINE CUSTOM
I
OK
CUST. ZONES NAME
I
OK
EDIT USER TERM 1
I
OK
Custom 1
I
OK
EDIT USER TERM 1
53
Advertisement
Table of Contents
