Table of Contents
Advertisement
communication, or, temporarily connected to receive event reports only.
When the PowerMax10-G2 display reads [ SESSION TIMEOUT ], press
55.
The PowerMax10-G2 display will read [ off on timeout
56.
Press the
and "always ON", for example, "always ON ".
57.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [ SESSION TIMEOUT ].
You can now press the
(see section 4.6.2.1), or press the
Key
Functionality
Moves the cursor from left to right.
Long press for speed.
Moves the cursor from right to left.
Long press for speed.
Scrolls upward the sequence of inserted digits.
Long press for speed.
Scrolls downward the sequence of inserted digits.
Long press for speed.
Places cursor to extreme right position of edit string and shows the last 16 digits of edit string.
Reverts to previous or top menu without saving the edit string.
Reverts to "<OK> TO EXIT" without saving the edit string.
Saves and reverts to previous menu.
OK
I
Clears all digits to the right of cursor.
Clears one digit by cursor.
Selects between uppercase or lowercase digits.
4.6.3 Configuring Event Reporting to Monitoring Station.
Here you determine which types of event will be reported to Monitoring Stations. Due to lack of space in the display,
abbreviations are used: alarm is "alrm", alert is "alrt" and open/close is "o/c". The asterisk ( ) is a separator between
events reported to Monitoring Station 1 and events reported to Monitoring Station 2.
Messages are divided by type into the following groups:
Group
Abbr.
Alarms
alrm
Open/close
o/c
Alerts
Alrt
Maintenance
-
"Alarm" group has the highest priority and "Alert" group has the lowest priority.
The selectable options are as follows:
Plan name
"all -o/c
backup"
"all
all"
"all-o/c
all -o/c "
"all –o/c
o/c "
"all (–alrt)
alrt"
"alrm
all (–alrm)"
"disable report"
"all
backup"
Note: "All" means that all 4 groups are reported and also trouble messages - sensor / system low battery, sensor inactivity,
power failure, jamming, communication failure etc.
D-302756
or
button to select between "off on timeout"
button to take you to the "
button to take you to "
Events Reported
Fire, Burglary, Panic, Tamper
Arming AWAY, Arming HOME, Disarming
No-activity, Emergency, Latchkey, Gas, Flood,
Temperature
Low-battery AC failure
Sent to center 1
All but open/close
All
All but open/close
All but open/close
All but alerts
Alarms
Nothing
All
.
I
OK
].
" menu
GPRS REPORT
".
<OK> TO EXIT
All but open/close if center 1 doesn't respond
All
All but open/close
Open/close
Alerts
All but alarms
Nothing
All if cent. 1 doesn't respond
I
OK
off on timeout
or
always ON
I
OK
always ON
SESSION TIMEOUT
Sent to center 2
25
Advertisement
Table of Contents
