Disable Snmp Linkchange_Traps - Extreme Networks EAS 200-24p Switch CLI Manual

disable snmp linkchange_traps

Description
This command is used to configure the sending of linkchange traps.
Format
disable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the sending of linkchange traps:
EAS 200-24p:admin# disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
disable snmp linkchange_traps
769