Show Mcast_Filter_Profile - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 36: Multicast Filter Command List

show mcast_filter_profile

Description
This command displays the defined multicast address profiles. If the IPv4 or IPv6 option is not
specified, IPv4 is implied.
Format
show mcast_filter_profile {[ipv4 | ipv6]} {profile_id <value 1-24> | profile
name <name 1-32>}
Parameters
ipv4 - (Optional) Specifies to delete an IPv4 multicast profile.
●
ipv6 - (Optional) Specifies to delete an IPv6 multicast profile.
●
profile_id - (Optional) Specifies the ID of the profile
●
<value 1-24> - Enter the profile ID value here. This value must be between 1 and 24.
●
profile_name - (Optional) Specifies to display a profile based on the profile name.
●
<name 1-32> - Enter the profile name here. The profile name can be up to 32 characters long.
●
Restrictions
None.
Example
To display all the defined multicast address profiles:
EAS 200-24p:admin# show mcast_filter_profile
Command: show mcast_filter_profile
Profile ID Name
---- ----------------
1 MOD
2 customer
Total Entries : 2
EAS 200-24p:admin#
548
Multicast Addresses
---------------- ----------------
234.1.1.1 - 238.244.244.244
234.1.1.1 - 238.244.244.244
224.19.62.34 - 224.19.162.200
Extreme Networks EAS 200-24p Switch CLI Manual