Rename - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 23: Flash File System (FFS) Command List

rename

Description
This command is used to rename a file. This command is used to rename a file in the file system. The
pathname specifies the file (in path form) to be renamed and the filename specifies the new filename. If
the pathname is not a full path, then it refers to a path under the current directory for the drive. The
renamed file will stay in the same directory.
Format
rename <pathname 32> <filename 32>
Parameters
<pathname 32> - Specified the file (in path form) to be renamed. This name can be up to 32
●
characters long.
<filename 32> - Specified the new name of the file. This name can be up to 32 characters long.
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To rename a file:
EAS 200-24p:admin# rename run.had run1.had
Command: rename run.had run1.had
Success.
EAS 200-24p:admin#
366
Extreme Networks EAS 200-24p Switch CLI Manual