erase
Description
This command is used to delete a file stored in the file system.
System will prompt if the target file is a FW or configuration whose type is boot up.
Format
erase <pathname 32>
Parameters
<pathname 32> - Specifies the file to be deleted. If it is specified in the associated form, then it is
●
related to the current directory. This name can be up to 32 characters long.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To erase a file:
EAS 200-24p:admin#erase config2.cfg
Command: erase config2.cfg
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
erase
369