Config Authentication Ports - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 15: Compound Authentication Command List

config authentication ports

Description
This command is used to configure the authorization mode on ports.
Format
config authentication ports [<portlist> | all] {auth_mode [port_based |
host_based]}
Parameters
<portlist> - Specify a port or range of ports to configure.
●
all - Specify to configure all ports.
●
auth_mode - (Optional) The authorization mode is port-based or host-based.
●
port-based - If one of the attached hosts pass the authentication, all hosts on the same port will
●
be granted access to the network. If the user fails the authorization, this port will keep trying the
next authentication.
host-based - Specify to allow every user to be authenticated individually.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
The following example sets the authentication mode of all ports to host-based:
EAS 200-24p:admin#config authentication ports all auth_mode host_based
Command: config authentication ports all auth_mode host_based
Success.
EAS 200-24p:admin#
260
Extreme Networks EAS 200-24p Switch CLI Manual