Config Vlan - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 3: 802.1Q VLAN Command List

config vlan

Description
This command is used to configure a VLAN based on the name.
Format
config vlan <vlan_name 32> {[add [tagged | untagged | forbidden] | delete]
<portlist> | advertisement [enable | disable]}(1)
Parameters
vlan - The name of the VLAN you want to add ports to.
●
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
●
add - (Optional) Specifies to add tagged, untagged or forbidden ports to the VLAN.
●
tagged - Specifies the additional ports as tagged.
●
untagged - Specifies the additional ports as untagged.
●
forbidden - Specifies the additional ports as forbidden.
●
delete - (Optional) Specifies to delete ports from the VLAN.
●
<portlist> - (Optional) Enter the list of ports used for the configuration here.
●
advertisement - (Optional) Specifies the GVRP state of this VLAN.
●
enable - Specifies to enable advertisement for this VLAN.
●
disable - Specifies to disable advertisement for this VLAN.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add 4 through 8 as tagged ports to the VLAN v1:
EAS 200-24p:admin# config vlan v1 add tagged 4-8
Command: config vlan v1 add tagged 4-8
Success.
EAS 200-24p:admin#
54
Extreme Networks EAS 200-24p Switch CLI Manual