Chapter 25: IGMP / MLD Snooping Command List
config router_ports_forbidden
Description
This command allows you to designate a range of ports as being not connected to multicast-enabled
routers. This ensures that the forbidden router port will not propagate routing packets out.
Format
config router_ports_forbidden [ <vlan_name 32> | vlanid <vlanid_list> ] [add |
delete] <portlist>
Parameters
<vlan_name 32> - Specify the name of the VLAN on which the router port resides.
●
vlanid - Specify the ID of the VLAN on which the router port resides.
●
<vlanid_list> - Enter the VLAN ID list here.
●
add - Specify to add the router ports.
●
delete - Specify to delete the router ports.
●
<portlist> - Specify a range of ports to be configured.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set up port range 1-10 to forbidden router ports of default VLAN:
EAS 200-24p:admin# config router_ports_forbidden default add 1-10
Command: config router_ports_forbidden default add 1-10
Success.
EAS 200-24p:admin#
390
Extreme Networks EAS 200-24p Switch CLI Manual