config ipv6 nd ns retrans_time
Description
Configure the IPv6 ND neighbor solicitation retransmit time, which is between retransmissions of
neighbor solicitation messages to a neighbor when resolving the address or when probing the
reachability of a neighbor.
Format
config ipv6 nd ns ipif <ipif_name 12> retrans_time <millisecond 0-4294967295>
Parameters
ipif - The IPv6 interface name
●
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters long.
●
retrans_time - Neighbor solicitation's re-transmit timer in millisecond.
●
<millisecond 0-4294967295> - Enter the re-transmit timer value here. This value must be between
●
0 and 4294967295 milliseconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the retrans_time of IPv6 ND neighbor solicitation:
EAS 200-24p:admin# config ipv6 nd ns ipif Zira retrans_time 1000000
Command: config ipv6 nd ns ipif Zira retrans_time 1000000
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config ipv6 nd ns retrans_time
447