config dhcp_local_relay vlan vlanid
Description
This command is used to enable or disable DHCP local relay function for specified VLAN ID.
Format
config dhcp_local_relay vlan vlanid <vlan_id> state [enable | disable]
Parameters
vlanid - Specifies the VLAN ID that the DHCP local relay function will be enabled.
●
<vlan_id> - Enter the VLAN ID used here.
●
state - Enable or disable DHCP local relay for specified vlan.
●
enable - Specifies that the DHCP local relay function will be enabled.
●
disable - Specifies that the DHCP local relay function will be disabled.
●
Restrictions
Only Administrator-level users can issue this command.
Example
To enable DHCP local relay for default VLAN:
EAS 200-24p:admin# config dhcp_local_relay vlan vlanid 1 state enable
Command: config dhcp_local_relay vlan vlanid 1 state enable
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config dhcp_local_relay vlan vlanid
333