Extreme Networks EAS 200-24p Switch CLI Manual page 364

Chapter 23: Flash File System (FFS) Command List
cd
Description
This command is used to change the current directory. The current directory is changed under the
current drive. If you want to change the working directory to the directory in another drive, then you
need to change the current drive to the desired drive, and then change the current directory. The current
drive and current directory will be displayed if the <pathname> is not specified.
Format
cd {<pathname 32>}
Parameters
<pathname 32> - (Optional) Specifies the directory to be removed. The path name can be specified
●
either as a full path name or partial name. For partial path name, it indicates the file is in the current
directory. This name can be up to 32 characters long.
Restrictions
None.
Example
To change to other directory or display current directory path:
EAS 200-24p:admin#cd
Command: cd
Current work directory: "/c:".
EAS 200-24p:admin#
364
Extreme Networks EAS 200-24p Switch CLI Manual