Extreme Networks EAS 200-24p Switch CLI Manual page 165

Layer 2 managed poe ethernet switch
Hide thumbs Also See for EAS 200-24p Switch CLI:
Table of Contents

Advertisement

counter - (Optional) Specifies the ACL counter. This is optional. The default is "disable". The
resource may be limited so that a counter cannot be turned on. Counters will be cleared when the
function is disabled.
enable - Specifies that the ACL counter option will be enabled.
disable - Specifies that the ACL counter option will be disabled.
exceed - Specifies the action when a packet is mapped to the "yellow" color.
permit - Permits the packet.
replace_dscp - Changes the DSCP of the packet.
-
<value 0-63> - Enter the replace DSCP value here. This value must be between 0 and 63.
drop - Drops the packet.
counter - (Optional) Specifies the ACL counter. This is optional. The default is "disable". The
resource may be limited so that a counter cannot be turned on. Counters will be cleared when the
function is disabled.
enable - Specifies that the ACL counter option will be enabled.
disable - Specifies that the ACL counter option will be disabled.
violate - Specifies the action when a packet is mapped to the "red" color.
permit - Permits the packet.
replace_dscp - Changes the DSCP of the packet.
-
<value 0-63> - Enter the replace DSCP value here. This value must be between 0 and 63.
drop - Drops the packet.
counter - (Optional) Specifies the ACL counter. This is optional. The default is "disable". The
resource may be limited so that a counter cannot be turned on. Counters will be cleared when the
function is disabled.
enable - Specifies that the ACL counter option will be enabled.
disable - Specifies that the ACL counter option will be disabled.
delete - Deletes the specified flow_meter.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a "two rate, three color" flow meter:
EAS 200-24p:admin#config flow_meter profile_id 1 access_id 1 tr_tcm cir 1000 cbs
2000 pir 2000 pbs 2000 color_blind conform permit counter enable exceed permit
replace_dscp 60 counter enable violate drop
Command: config flow_meter profile_id 1 access_id 1 tr_tcm cir 1000 cbs 2000 pir
2000 pbs 2000 color_blind conform permit counter enable exceed permit replace_dscp
60 counter enable violate drop
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config flow_meter
165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents