Config Scheduling - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 48: Quality of Service (QoS) Command List

config scheduling

Description
Used to configure the traffic scheduling mechanism for each CoS queue.
Format
config scheduling {ports [<portlist> | all]} <class_id 0-7> [strict | weight
<value 1-127>]
Parameters
ports - Specifies a range of ports to be configured.
●
<portlist> - Enter the list of port used for this configuration here.
●
<class_id 0-7> - This specifies the 8 hardware priority queues which the config scheduling command
●
will apply to. The four hardware priority queues are identified by number from 0 to 7 with the 0
queue being the lowest priority.
strict - The queue will operate in strict mode.
●
weight - Specifies the weights for weighted round robin. A value between 0 and n can be specified.
●
<value 1-127> - Enter the weights for weighted round robin value here. This value must be
●
between 1 and 127.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the traffic scheduling CoS queue 1 to weight 25 on port 10:
EAS 200-24p:admin#
Command: config scheduling ports 10 1 weight 25
Success.
EAS 200-24p:admin#
662
config scheduling ports 10 1 weight 25
Extreme Networks EAS 200-24p Switch CLI Manual