Chapter 25: IGMP / MLD Snooping Command List
delete mld_snooping static_group
Description
Used to delete a MLD Snooping multicast static group.
Format
delete mld_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>]
<ipv6addr>
Parameters
vlan - Specify the name of the VLAN on which the static group resides.
●
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
●
vlanid - Specify the ID of the VLAN on which the static group resides.
●
<vlanid_list> - Enter the VLAN ID list here.
●
<ipv6addr> - Specify the multicast group IP address.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an MLD snooping static group for VLAN 1, group FF1E::1:
EAS 200-24p:admin# delete mld_snooping default FF1E::1
Command: delete mld_snooping default FF1E::1
Success.
EAS 200-24p:admin#
430
Extreme Networks EAS 200-24p Switch CLI Manual