Create Mcast_Filter_Profile - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 36: Multicast Filter Command List

create mcast_filter_profile

Description
This command configures a multicast address profile. Multiple ranges of multicast addresses can be
defined in the profile. If the IPv4 or ipv6 option is not specified, IPv4 is implied.
Format
create mcast_filter_profile {[ipv4 | ipv6]} profile_id <value 1-24>
profile_name <name 32>
Parameters
ipv4 - (Optional) Adds an IPv4 multicast profile.
●
ipv6 - (Optional) Adds an IPv6 multicast profile.
●
profile_id - The ID of the profile. Range is 1 to n.
●
<value 1-24> - Enter the profile ID value here. This value must be between 1 and 24.
●
profile_name - Provides a meaningful description for the profile.
●
<name 32> - Enter the profile name here. The profile name can be up to 32 characters long.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a multicast address profile with a profile ID of 2 and a profile name of MOD:
EAS 200-24p:admin# create mcast_filter_profile profile_id 2 profile_name MOD
Command: create mcast_filter_profile profile_id 2 profile_name MOD
Success.
EAS 200-24p:admin#
544
Extreme Networks EAS 200-24p Switch CLI Manual