Chapter 37: Multiple Spanning Tree Protocol (MSTP) Command List
config stp version
Description
This command is used to enable STP globally.
Format
config stp version [mstp | rstp | stp]
Parameters
version - To decide to run under which version of STP.
●
mstp - Multiple Spanning Tree Protocol.
●
rstp - Rapid Spanning Tree Protocol.
●
stp - Spanning Tree Protocol.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure STP version:
EAS 200-24p:admin#
Command: config stp version mstp
Success.
EAS 200-24p:admin#
To config STP version with the same value of old configuration:
EAS 200-24p:admin#
Command: config stp version mstp
Configure value is the same with current value.
Success.
EAS 200-24p:admin#
568
config stp version mstp
config stp version mstp
Extreme Networks EAS 200-24p Switch CLI Manual