Create Authen Server_Host - Extreme Networks EAS 200-24p Switch CLI Manual

create authen server_host

Description
This command is used to create an authentication server host. When an authentication server host is
created, IP address and protocol are the index. That means over 1 authentication protocol services can
be run on the same physical host. The maximum supported number of server hosts is 16.
Format
create authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ |
radius] { port <int 1-65535> | key [<key_string 254> | none] | timeout <int 1-
255> | retransmit <int 1-20> }
Parameters
server_host - Server host's IP address.
●
<ipaddr> - Enter the server host IP address used here.
●
protocol - Specifies the host's authentication protocol.
●
tacacs - Server host's authentication protocol.
●
xtacacs - Server host's authentication protocol.
●
tacacs+ - Server host's authentication protocol.
●
radius - Server host's authentication protocol.
●
port - (Optional) The port number of authentication protocol for server host. Default value for
●
TACACS/XTACACS/TACACS+ is 49. Default value for RADIUS is 1812.
<int 1-65535> - Enter the authentication protocol port number here. This value must be between 1
●
and 65535.
key - (Optional) The key for TACACS+ and RADIUS authentication. If the value is null, no
●
encryption will apply. This value is meaningless for TACACS and XTACACS.
<key_string 254> - Enter the TACACS+ or the RADIUS key here. This key can be up to 254
●
characters long.
none - No encryption for TACACS+ and RADIUS authentication. This value is meaningless for
●
TACACS and XTACACS.
timeout - (Optional) The time in second for waiting server reply. Default value is 5 seconds.
●
<int 1-255> - Enter the timeout value here. This value must be between 1 and 255 seconds.
●
retransmit - (Optional) The count for re-transmit. This value is meaningless for TACACS+. Default
●
value is 2.
<int 1-20> - Enter the re-transmit value here. This value must be between 1 and 20.
●
Restrictions
Only Administrator-level users can issue this command.
Extreme Networks EAS 200-24p Switch CLI Manual
create authen server_host
133