Config Mac_Based_Access_Control_Local - Extreme Networks EAS 200-24p Switch CLI Manual

config mac_based_access_control_local

Description
This command is used to configure a MAC-based Access Control local database entry.
Format
config mac_based_access_control_local mac <macaddr> [vlan <vlan_name 32> |
vlanid <vlanid 1-4094> | clear_vlan]
Parameters
mac - Specify the authenticated host's MAC address.
●
<macaddr> - Enter the MAC address used here.
●
vlan - Specify the target VLAN by VLAN name. When this host is authorized, the host will be
●
assigned to this VLAN.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
●
vlanid - Specify the target VLAN by VID. When this host is authorized, the host will be assigned to
●
this VLAN if the target VLAN exists.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
●
clear_vlan - Not specify the target VLAN. When this host is authorized, will not assign target
●
VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the target VLAN "default" for the MAC-based Access Control local database entry 00-00-
00-00-00-01:
EAS 200-24p:admin# config mac_based_access_control_local mac 00-00-00-00-00-01
vlan default
Command: config mac_based_access_control_local mac 00-00-00-00-00-01 vlan default
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config mac_based_access_control_local
515