Config Firmware Image - Extreme Networks EAS 200-24p Switch CLI Manual

config firmware image

Description
Used to select a firmware file as a boot up file. This command is required to be supported when
multiple firmware images are supported.
Format
config firmware image <path_filename 64> boot_up
Parameters
<path_filename 64> - Specifies a firmware file on the device file system.
●
boot_up - Specify the firmware as the boot up firmware.
●
Restrictions
Only Administrator level can issue this command.
Example
To config image 1 as the boot up image:
EAS 200-24p:admin# config firmware image image 1 boot_up
Command: config firmware image image 1 boot_up
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config firmware image
227