Show 802.1X - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 4: 802.1X Command List

show 802.1x

Description
Use to display the 802.1X state or configurations.
Format
show 802.1x {[auth_state | auth_configuration] ports {<portlist>}}
Parameters
auth_state - (Optional) Used to display 802.1X authentication state machine of some or all ports
●
auth_configuration - (Optional) Used to display 802.1X configurations of some or all ports.
●
port - (Optional) Specifies a range of ports to be displayed. If no port is specified, all ports will be
●
displayed.
<portlist> - Enter the list of ports used for the configuration here.
●
If no parameter is specified, the 802.1X system configurations will be displayed.
Restrictions
None.
Example
To display the 802.1X port level configurations:
EAS 200-24p:admin# show 802.1x auth_configuration ports 1
Command: show 802.1x auth_configuration ports 1
Port Number : 1
Capability : None
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60
TxPeriod : 30
SuppTimeout : 30
ServerTimeout : 30
MaxReq : 2
ReAuthPeriod : 3600
ReAuthenticate : Disabled
Forward EAPOL PDU On Port : Disabled
Max User On Port : 16
EAS 200-24p:admin#
84
sec
sec
sec
sec
times
sec
Extreme Networks EAS 200-24p Switch CLI Manual