config snmp system_name
Description
This command is used to configure the name for the switch.
Format
config snmp system_name {<sw_name>}
Parameters
system_name - A maximum of 128 characters is allowed. And NULL string is accepted.
●
<sw_name> - (Optional) Enter the system name used here.
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the switch name for "EAS Switch":
EAS 200-24p:admin# config snmp system_name EAS Switch
Command: config snmp system_name EAS Switch
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config snmp system_name
761