Extreme Networks EAS 200-24p Switch CLI Manual page 313

state - (Optional) Specifies to enable or disable the LCK function.
●
enable - Specifies that the LCK function will be enabled.
●
disable - Specifies that the LCK function will be disabled.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the LCK function enabled and client level is 5:
EAS 200-24p:admin# config cfm lock md op-domain ma op-ma mepid 1 state enable
level 5
Command: config cfm lock md op-domain ma op-ma mepid 1 state enable level 5
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config cfm lock
313