Config Multicast_Fdb - Extreme Networks EAS 200-24p Switch CLI Manual

config multicast_fdb

Description
This command is used to configure the switch's multicast MAC address forwarding database.
Format
config multicast_fdb <vlan_name 32> <macaddr> [add | delete] <portlist>
Parameters
<vlan_name 32> - The name of the VLAN on which the MAC address resides. The maximum name
●
length is 32.
<macaddr> - The MAC address that will be added or deleted to the forwarding table.
●
add - Specifies to add ports to the multicast forwarding table.
●
delete - Specifies to remove ports from the multicast forwarding table.
●
<portlist> - Specifies a range of ports to be configured.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a multicast MAC forwarding entry to the default VLAN on port 1 to 5:
EAS 200-24p:admin# config multicast_fdb default 01-00-5E-00-00-00 add 1-5
Command: config multicast_fdb default 01-00-5E-00-00-00 add 1-5
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config multicast_fdb
349