Chapter 68: Web-Based Access Control (WAC) Command List
config wac authorization attributes
Description
The config wac authorization attributes command will enable or disable the acceptation of authorized
configuration. When the authorization is enabled for WAC's radius, the authorized data assigned by the
RADUIS server will be accepted if the global authorization network is enabled. When the authorization
is enabled for WAC's local, the authorized data assigned by the local database will be accepted.
Format
config wac authorization attributes {radius [enable| disable] | local [enable
| disable]}(1)
Parameters
radius - (Optional) If specified to enable, the authorized data assigned by the RADUIS server will be
●
accepted if the global authorization network is enabled. The default state is enabled.
enable - Specifies that the authorized data assigned by the RADUIS server will be accepted.
●
disable - Specifies that the authorized data assigned by the RADUIS server will not be accepted.
●
local - (Optional) If specified to enable, the authorized data assigned by the local database will be
●
accepted if the global authorization network is enabled. The default state is enabled.
enable - Specifies that the authorized data assigned by the local database will be accepted.
●
disable - Specifies that the authorized data assigned by the local database will not be accepted.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable acceptation of authorized configuration:
EAS 200-24p:admin# config wac authorization attributes local disable
Command: config wac authorization attributes local disable
Success.
EAS 200-24p:admin#
886
Extreme Networks EAS 200-24p Switch CLI Manual