Create Port_Group - Extreme Networks EAS 200-24p Switch CLI Manual

create port_group

Description
This command is used to create a port group.
Format
create port_group id <value 1-64> name <name 16>
Parameters
id - Specifies the port group ID.
●
<value 1-64> - Enter the port group ID here. This value must be between 1 and 64.
●
name - Specifies the port group name.
●
<name 16> - Enter the port group name here. This name can be up to 16 characters long
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create a port group:
EAS 200-24p:admin#
Command: create port_group id 2 name group2
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
create port_group id 2 name group2
create port_group
193