Config Gratuitous_Arp Send Dup_Ip_Detected - Extreme Networks EAS 200-24p Switch CLI Manual

config gratuitous_arp send dup_ip_detected

Description
The command is used to enable/disable sending of gratuitous ARP request packet while duplicate IP is
detected. By default, the state is disabled.For this command, the duplicate IP detected means that the
system received a ARP request packet that is sent by an IP address that match the system's own IP
address. In this case, the system knows that some body out there uses an IP address that is conflict with
the system. In order to reclaim the correct host of this IP address, the system can send out the gratuitous
ARP request packet for this duplicate IP address.
Format
config gratuitous_arp send dup_ip_detected [enable | disable]
Parameters
enable - Enable sending of gratuitous ARP when duplicate IP is detected.
●
disable - Disable sending of gratuitous ARP when duplicate IP is detected.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable send gratuitous ARP request when duplicate IP is detected:
EAS 200-24p:admin# config gratuitous_arp send dup_ip_detected enable
Command: config gratuitous_arp send dup_ip_detected enable
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config gratuitous_arp send dup_ip_detected
375