Enable Clipaging - Extreme Networks EAS 200-24p Switch CLI Manual

enable clipaging

Description
The enable CLI paging command enables the pausing of the screen display when the show command
output reaches the end of the page. For those show commands that provide the display refresh function,
the display will not be refreshed when clipaging is disabled. The default setting is enabled.
Format
enable clipaging
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable pausing of the screen display when show command output reaches the end of the page:
EAS 200-24p:admin# enable clipaging
Command: enable clipaging
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
enable clipaging
31