Config Cfm Mep - Extreme Networks EAS 200-24p Switch CLI Manual

config cfm mep

Description
This command is used to configure the parameters of an MEP.
An MEP may generate 5 types of Fault Alarms, as shown below by their priorities from high to low:
Cross-connect CCM Received: priority 5
●
Error CCM Received: priority 4
●
Some Remote MEPs Down: priority 3
●
Some Remote MEP MAC Status Errors: priority 2
●
Some Remote MEP Defect Indications: priority 1
●
If multiple types of the fault occur on an MEP, only the fault with the highest priority will be alarmed.
Format
config cfm mep [mepname <string 32> | mepid <int 1-8191> md [<string 22> |
md_index <uint 1-4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>]]
{state [enable | disable] | ccm [enable | disable] | pdu_priority <int 0-7> |
fault_alarm [all | mac_status | remote_ccm | error_ccm | xcon_ccm | none] |
alarm_time <centisecond 250 -1000> | alarm_reset_time <centisecond 250-1000>}
Parameters
mepname - Specifies the MEP name.
●
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
●
mepid - Specifies the MEP ID.
●
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
●
md - Specifies the maintenance domain name.
●
<string 22> - Enter the maintenance domain name used here. This name can be up to 22
●
characters long.
md_index - Specifies the maintenance domain index.
●
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be
●
between 1 and 4294967295.
ma - Specifies the maintenance association name.
●
<string 22> - Enter the maintenance association name used here. This name can be up to 22
●
characters long.
ma_index - Specifies the maintenance association index.
●
<uint 1-4294967295> - Enter the maintenance association index value here. This value must be
●
between 1 and 4294967295.
state - (Optional) This is the MEP administrative state.
●
enable - Specifies that the MEP will be enabled.
●
disable - Specifies that the MEP will be disabled. This is the default value.
●
Extreme Networks EAS 200-24p Switch CLI Manual
config cfm mep
279