Config Port_Security Log State - Extreme Networks EAS 200-24p Switch CLI Manual

config port_security log state

Description
This command is used to enable or disable the port security log. When the port security log is enabled,
if there is a new MAC that violates the pre-defined port security configuration, the MAC, port and other
relevant information will be logged, otherwise, no log will be generated.
Format
config port_security log state [enable | disable]
Parameters
state - Specifies the port security log state.
●
enable - Specifies that the port security log will be enabled.
●
disable - Specifies that the port security log will be disabled.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable and then disable the port security log:
EAS 200-24p:admin#config port_security log state enable
Command: config port_security log state enable
Success.
EAS 200-24p:admin#config port_security log state disable
Command: config port_security log state disable
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config port_security log state
619