Extreme Networks EAS 200-24p Switch CLI Manual page 473

port_description - (Optional) This TLV optional data type indicates that LLDP agent should
●
transmit 'Port Description TLV on the port. The default state is disabled.
system_name - (Optional) This TLV optional data type includes indicates that LLDP agent should
●
transmit 'System Name TLV'. The default state is disabled.
system_description - (Optional) This TLV optional data type includes indicates that LLDP agent
●
should transmit 'System Description TLV'. The default state is disabled.
system_capabilities - (Optional) This TLV optional data type includes indicates that LLDP agent
●
should transmit 'System Capabilities TLV'. The system capability will indicate whether the device
provides repeater, bridge, or router function, and whether the provided functions are currently
enabled. The default state is disabled.
enable - Specifies that the basic TLV data types used from outbound LLDP advertisements will be
●
enabled.
disable - Specifies that the basic TLV data types used from outbound LLDP advertisements will be
●
disabled.
dot1_tlv_pvid - This TLV optional data type determines whether the IEEE 802.1 organizationally
●
defined port VLAN ID TLV transmission is allowed on a given LLDP transmission capable port. The
default state is disable.
enable - Specifies that the Dot1 TLV PVID option will be enabled.
●
disable - Specifies that the Dot1 TLV PVID option will be disabled.
●
dot1_tlv_protocol_vid - This TLV optional data type determines whether the IEEE 802.1
●
organizationally defined port and protocol VLAN ID TLV transmission is allowed on a given LLDP
transmission capable port. The default state is disable.
vlan - Specifies the VLAN used for this configuration.
●
all - Specifies that all the configured VLANs will be used for this configuration.
●
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters long.
●
vlanid - Specifies the VLAN ID used for this configuration.
●
- <vlanid_list> - Enter the ID of the VLAN here.
enable - Specifies that the Dot1 TLV protocol VID will be enabled.
●
disable - Specifies that the Dot1 TLV protocol VID will be disabled.
●
dot1_tlv_vlan_name - This TLV optional data type indicates whether the corresponding Local
●
System's VLAN name instance will be transmitted on the port. If a port is associated with multiple
VLANs. those enabled VLAN ID will be advertised. The default state is disable.
vlan - Specifies the VLAN used for this configuration.
●
all - Specifies that all the configured VLANs will be used for this configuration.
●
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters long.
●
vlanid - Specifies the VLAN ID used for this configuration.
●
- <vlanid_list> - Enter the ID of the VLAN here.
enable - Specifies that the Dot1 TLV VLAN name will be enabled.
●
disable - Specifies that the Dot1 TLV VLAN name will be disabled.
●
dot1_tlv_protocol_identity - This TLV optional data type indicates whether the corresponding Local
●
System's Protocol Identity instance will be transmitted on the port. The Protocol Identity TLV
provides a way for stations to advertise protocols that are important to the operation of the network.
Such as Spanning Tree Protocol, the Link Aggregation Control Protocol, and numerous vendor
proprietary variations are responsible for maintaining the topology and connectivity of the network.
Extreme Networks EAS 200-24p Switch CLI Manual
config lldp ports
473