Config Port_Group - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 7: Access Control List (ACL) Egress Command List

config port_group

Description
This command is used to add or delete a port list to a port group.
Format
config port_group [id <value 1-64> | name <name 16>] [add | delete]
[<portlist> | all]
Parameters
id - Specifies the port group ID.
●
<value 1-64> - Enter the port group ID used here. This value must be between 1 and 64.
●
name - Specifies the port group name.
●
<name 16> - Enter the port group name here. This name can be up to 16 characters long.
●
add - Add a port list to this port group.
●
delete - Delete a port list from this port group.
●
<portlist> - Enter a list of ports used for the configuration here.
●
all - Specifies that all the ports will be used for this configuration.
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Add port list "1-3" to the port group which ID is "2":
EAS 200-24p:admin#
Command: config port_group id 2 add 1-3
Success.
EAS 200-24p:admin#
194
config port_group id 2 add 1-3
Extreme Networks EAS 200-24p Switch CLI Manual