Show Ipif - Extreme Networks EAS 200-24p Switch CLI Manual

show ipif

Description
This command is used to display an IP interface.
Format
show ipif {<ipif_name 12>}
Parameters
ipif_name - Specifies the name of the IP interface.
●
<ipif_name 12> - (Optional) Enter the IP interface name used here. This name can be up to 12
●
characters long.
Restrictions
None.
Example
To display an IP interface:
EAS 200-24p:admin#show ipif
Command: show ipif
IP Interface
VLAN Name
Interface Admin State
Link Status
IPv4 Address
Proxy ARP
IPv4 State
IPv6 State
Total Entries: 1
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
: System
: default
: Enabled
: LinkDown
: 10.90.90.90/8 (Manual)
: Disabled (Local : Disabled)
: Enabled
: Enabled
Primary
show ipif
235