Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Manual
Advertisement
Table of Contents
Related Manuals for Extreme Networks EAS 200-24p Switch
Summary of Contents for Extreme Networks EAS 200-24p Switch
- Page 1 Extreme Networks EAS 200-24p Switch Hardware Installation Manual Layer 2 Managed PoE Ethernet Switch Release 1.00 Extreme Networks, Inc. 3585 Monroe Street Santa Clara, California 95051 (888) 257-3000 (408) 579-2800 http://www.extremenetworks.com Published: July 2011 Part number: 120704-00 Rev. 01...
- Page 2 Unified Access Architecture, Unified Access RF Manager, UniStack, XNV, the Extreme Networks logo, the Alpine logo, the BlackDiamond logo, the Extreme Turbodrive logo, the Summit logos, and the Powered by ExtremeXOS logo are trademarks or registered trademarks of Extreme Networks, Inc. or its subsidiaries in the United States and/or other countries.
-
Page 3: Table Of Contents
Password Protection ..............................28 IP Address Assignment ...........................28 SNMP Settings ..............................28 Traps ................................29 MIBs ................................29 Chapter 5: Web-Based Switch Configuration ..................31 Introduction................................31 Logging onto the Web Manager ..........................31 Web-Based User Interface .............................32 Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 4 Appendix A: Technical Specifications ....................35 General...................................35 Physical and Environmental ...........................36 Performance ................................36 LED Indicators ................................37 Port Functions ................................38 Appendix B: Cables and Connectors ..................... 41 Ethernet Cable ...............................41 Console Cable ................................42 Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 5: Preface
Menu Name > Menu Option Indicates the menu structure. Device > Port > Port Properties means the Port Properties menu option under the Port menu option that is located under the Device menu. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 6: Notes, Cautions, And Warnings
Keep your system away from radiators and heat sources. Also, do not block cooling vents. ● Do not spill food or liquids on system components, and never operate the product in a wet ● environment. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 7 If the system has multiple sources of power, disconnect power from the system by unplugging all ● power cables from the power supplies. Move products with care; ensure that all casters and/or stabilizers are firmly connected to the ● system. Avoid sudden stops and uneven surfaces. Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 8: General Precautions For Rack-Mountable Products
The system chassis must be positively grounded to the rack cabinet frame. Do not attempt to connect power to the system until grounding cables are connected. Completed power and safety ground wiring must be Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 9: Protecting Against Electrostatic Discharge
2 When transporting a sensitive component, first place it in an antistatic container or packaging. 3 Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads and an antistatic grounding strap. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 10 Preface Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 11: Chapter 1: Introduction
The list below highlights the significant protocols and features supported by the switch. IEEE 802.3 ● IEEE 802.3z ● IEEE 802.3x Flow Control in full-duplex compliant ● IEEE 802.3u ● IEEE 802.3ab ● Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 12 MLD Snooping v1 (MLDv2 Awareness) ● Up to 1024 IGMP/MLD snooping groups ● SNMP v1/v2/v3 ● SNMP over IPv6 ● Secure Sockets Layer (SSL) v1/v2/v3 ● Secure Shell (SSH) v2 ● Port Mirroring ● Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
- Page 13 Web-based GUI compatible with most major browsers, including Internet Explorer (version 5.5 and ● later), Netscape (version 8.0 and later), Mozilla Firefox (version 2.0 and later), and Safari (version 4.0 and later). Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 14: Ports
LED goes dark. The indicator will light steady green when a user is logged in through the console port. This LED blinks red when a fan fails. No light indicates all fans are working normally. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 15: Rear Panel Description
Be reminded that without proper heat dissipation and air circulation, system components might overheat, which could lead to system failure or even severely damage components. Figure 4: Identical Side Panels of the EAS 200-24p Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 16 Chapter 1: Introduction Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 17: Chapter 2: Installation
When installing the switch on a level surface, attach the rubber feet to the bottom of the device. The ● rubber feet cushion the switch, protect the casing from scratches and prevent it from scratching other surfaces. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 18: Installing The Switch Without A Rack
NOTE Please review the Installation Guidelines above before installing the switch in a rack. Make sure there is adequate space around the switch to allow for proper air flow, ventilation, and cooling. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 19: Mounting The Switch In A Standard 19" Rack
After installing components in a rack, do not pull more than one component out of the rack on its slide assemblies at one time. The weight of more than one extended component could cause the rack to tip over and may result in injury. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 20: Installing Sfp Ports
The switch is equipped with SFP (Small Form Factor Portable) ports, which are to be used with fiber- optical transceiver cabling in order to uplink various other networking devices for a Gigabit link that may span great distances. Figure 8: Inserting Fiber-Optic Transceivers Into the Switch Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 21: Chapter 3: Connecting The Switch
The Link/Act LEDs for each Ethernet port will light green or amber when the link is valid. A blinking LED indicates packet activity on that port. Figure 9: Connecting the Switch to an End Node Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 22: Switch To Switch
Connect a 1000BASE-T switch port to the switch via a twisted pair Category 5e UTP/STP cable. ● Connect a switch supporting a fiber-optic uplink to the SFP ports via fiber-optic cabling. ● Figure 10: Connecting a Switch to Another Switch Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 23: Connecting To Network Backbone Or Server
Connections to the Gigabit Ethernet ports are made using a fiber-optic cable or Category 5e copper cable, depending on the type of port. A valid connection is indicated when the Link LED is lit. Figure 11: Connecting the Switch to a Server Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 24 Chapter 3: Connecting the Switch Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 25: Chapter 4: Introduction To Switch Management
A console cable with a male DB-9 connector on one end and an RJ-45 connection on the other. This ● cable should be included with the switch. It establishes the physical connection to the console port. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 26 Upon the initial connection, there is no user name or password and therefore just press Enter twice to access the command line interface. Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 27: First Time Connecting To The Switch
The default username for this switch is admin, and there is no password. NOTE The first user automatically gets Administrator level privileges. At least one Admin-level user account must be created for the switch. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 28: Password Protection
A defined set of variables (managed objects) is maintained by the SNMP agent and used to manage the device. These objects are defined in a Management Information Base (MIB), which provides Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 29: Traps
MIB-II, the switch also supports its own proprietary enterprise MIB as an extended Management Information Base. The proprietary MIB may also be retrieved by specifying the MIB Object Identifier. MIB values can be either read-only or read-write. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 30 Chapter 4: Introduction to Switch Management Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 31: Chapter 5: Web-Based Switch Configuration
For this example we’ll use the IP address 192.168.69.123/24. The URL in the address bar should read something like: http://192.168.69.123, where the number 123 represent the IP address of the switch. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 32: Web-Based User Interface
The switch management features available in the Web-based manager are explained below. Web-Based User Interface The user interface provides access to various switch configuration and management windows, allows the user to view performance statistics, and permits graphical monitoring of the system status. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 33: Areas Of The User Interface
Some management functions, including save, reboot, download and upload are accessible here. Area 3 Presents switch information based on user selection and the entry of configuration data. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 34: Web Pages
There is no default user name or password necessary to access the switch's management mode. NOTE Be sure to configure the user name and password in the User Accounts window before connecting the switch to the greater network. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 35: Appendix A: Technical Specifications
Cat.5 Enhanced for 1000BASE-T UTP Cat.5, Cat. 5 Enhanced for 100BASE-TX UTP Cat.3, 4, 5 for 10BASE-T EIA/TIA-568 100-ohm screened twisted-pair (STP)(100m) Number of Ports 20-Port PoE 10/100/1000Base-T and 4 Combo PoE Copper/SFP ports. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 36: Physical And Environmental
65.48 million packets per second. Switching Capability 48Gbps Priority Queues 8 Priority Queues per port MAC Address Table Supports 16K MAC addresses Wire Speed Full-wire speed (full-duplex) operation on all ports including Gigabit ports. Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 37: Led Indicators
When there is a secure connection (or link) to 100Mbps Ethernet device at any of the ports. Blinking When there is reception or transmission of data occurring at 100Mbps. Light off No link Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 38: Port Functions
• 10057 - 1000BASE-BX-U BiDi SFP (1000BASE-BX-U SFP, 1310-nm TX/1490-nm RX wavelength) Compliant to following standards: • IEEE 802.3z compliance • IEEE 802.3x Flow Control support for Full-Duplex mode. • Support Auto-negotiation for Full-Duplex/ flow control operations Extreme Networks EAS 200-24p Switch Hardware Installation Manual... - Page 39 • 10057 - 1000BASE-BX-U BiDi SFP (1000BASE-BX-U SFP, 1310-nm TX/1490-nm RX wavelength) Compliant to following standards: • IEEE 802.3z compliance • IEEE 802.3x Flow Control support for Full-Duplex mode. • Support Auto-negotiation for Full-Duplex/ flow control operations Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
- Page 40 Appendix A: Technical Specifications Extreme Networks EAS 200-24p Switch Hardware Installation Manual...
-
Page 41: Appendix B: Cables And Connectors
RJ-45 Pin Assignment Contact MDI-X Port MDI-II Port RD+ (receive) TD+ (transmit) RD- (receive) TD- (transmit) TD+ (transmit) RD+ (receive) 1000BASE-T 1000BASE-T 1000BASE-T 1000BASE-T TD- (transmit) RD- (receive) 1000BASE-T 1000BASE-T 1000BASE-T 1000BASE-T Extreme Networks EAS 200-24p Switch Hardware Installation Manual... -
Page 42: Console Cable
Console-to-DJ-45 receptacle/connector and their pin assignments. Figure 17: Console-to-RJ-45 Cable Console Pin Assignment Console (DB9/RS232) RJ-45 Not Used Not Used Not Used Not Used GND (shared) Not Used Not Used Not Used Not Used Not Used Extreme Networks EAS 200-24p Switch Hardware Installation Manual...