Show Arpentry - Extreme Networks EAS 200-24p Switch CLI Manual

show arpentry

Description
This command is used to displays the ARP table. You can filter the display by IP address, MAC
address, Interface name, or static entries.
Format
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address
<macaddr>}
Parameters
ipif - (Optional) The name of the IP interface the end node or station for which the ARP table entry
●
was made, resides on.
<ipif_name 12> - Enter the IP interface name here. This value can be up to 12 characters long.
●
ipaddress - (Optional) The IP address of the end node or station.
●
<ipaddr> - Enter the IP address here.
●
static - (Optional) Display the static entries in the ARP table.
●
mac_address - (Optional) Displays the ARP entry by MAC address.
●
<macaddr> - Enter the MAC address here.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display the ARP table:
EAS 200-24p:admin#
Command: show arpentry
ARP Aging Time : 20
Interface IP Address
------------- ---------------
System 10.0.0.0
System 10.1.1.1
System 10.1.1.2
System 10.1.1.3
System 10.90.90.90
System 10.255.255.255
Total Entries: 6
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
show arpentry
MAC Address
-----------------
FF-FF-FF-FF-FF-FF
00-02-03-04-05-06
00-02-03-04-05-06
00-02-03-04-05-06
00-01-02-03-04-00
FF-FF-FF-FF-FF-FF
Type
---------------
Local/Broadcast
Static
Dynamic
Static
Local
Local/Broadcast
show arpentry
203