state - (Optional) Specifies to enable or disable the AIS function.
●
enable - Specifies that the AIS function will be enabled.
●
disable - Specifies that the AIS function will be disabled.
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the AIS function enabled and client level is 5:
EAS 200-24p:admin# config cfm ais md op-domain ma op-ma mepid 1 state enable level
5
Command: config cfm ais md op-domain ma op-ma mepid 1 state enable level 5
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config cfm ais
311