Enable Web - Extreme Networks EAS 200-24p Switch CLI Manual

enable web

Description
The switch allows you manage the switch via HTTP based management software. Use the command to
enable HTTP and configure port number.
Format
enable web {<tcp_port_number 1-65535>}
Parameters
<tcp_port_number 1-65535> - (Optional) The TCP port number. TCP ports are numbered between 1
●
and 65535. The "well-known" TCP port for the WEB protocol is 80.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable HTTP and configure port number:
EAS 200-24p:admin# enable web 80
Command: enable web 80
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
enable web
223