Displaying Snmp Settings; Resetting And Disabling Snmp; Snmp Reset And Disable Commands - Extreme Networks Summit1 Installation And User Manual

D
ISPLAYING
To display the SNMP settings configured on the Summit, enter the following command:
show management
This command displays the following information:
• Enable/disable state for telnet, SNMP, and Web access
• SNMP community strings
• Authorized SNMP station list
• SNMP trap receiver list
• Login statistics
R
ESETTING AND
To reset and disable SNMP settings, use the commands in
Table 3-8: SNMP Reset and Disable Commands
Command
disable snmp access
disable snmp trap
unconfig management
S S I
UMMIT WITCH NSTALLATION AND
SNMP S
ETTINGS
D
ISABLING
U G
SER UIDE
SNMP
Description
Disables SNMP on the switch.
Prevents SNMP traps from being sent from the switch.
Does not clear the SNMP trap receivers that have been
configured.
Restores default values to all SNMP-related entries.
U
Table 3-8.
SNMP
SING
3-21