Delete Ipif - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 11: Basic Commands Command List

delete ipif

Description
This command is used to delete an IP interface.
Format
delete ipif [<ipif_name 12> {ipv6address <ipv6networkaddr>} | all]
Parameters
ipif - Specifies the name of the IP interface.
●
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
●
long.
ipv6address – (Optional) Specifies the IPv6 network address. The address should specify a host
●
address and length of network prefix. There can be multiple V6 addresses defined on an interface.
<ipv6networkaddr> - Enter the IPv6 address used here.
●
all – Specifies that all the IP interfaces will be used.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IP interface:
EAS 200-24p:admin#delete ipif newone
Command: delete ipif newone
Success.
EAS 200-24p:admin#
232
Extreme Networks EAS 200-24p Switch CLI Manual