Show Multicast Vlan_Filtering_Mode - Extreme Networks EAS 200-24p Switch CLI Manual

show multicast vlan_filtering_mode

Description
This command is used to show the multicast packet filtering mode for VLANs.
Note: A product supports the multicast VLAN filtering mode could not support the port filtering mode
at the same time.
Format
show multicast vlan_filtering_mode {[ vlanid < vidlist> | vlan <vlan_name
32>]}
Parameters
vlanid - (Optional) Specifies a list of VLANs to be configured.
●
<vidlist> - Enter the VLAN ID list here.
●
vlan - (Optional) Specifies the name of the VLAN. The maximum name length is 32.
●
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
●
If no parameter is specified, the device will show all multicast filtering settings in the device.
Restrictions
None.
Example
To show the multicast vlan_filtering_mode for VLANs:
EAS 200-24p:admin#show multicast vlan_filtering_mode
Command: show multicast vlan_filtering_mode
VLAN ID/VLAN Name
----------------------------------------
1 /default
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
show multicast vlan_filtering_mode
Multicast Filter Mode
-----------------------------
forward_unregistered_groups
357