Config Wac Switch_Http_Port - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 68: Web-Based Access Control (WAC) Command List

config wac switch_http_port

Description
The TCP port for HTTP or HTTPs is used to identify the HTTP or HTTPs packets
That will be trapped to CPU for authentication processing, or to access the login page.
If not specified, the default port number for HTTP is 80, and the default port number for HTTPS is 443.
If no protocol specified, the protocol is HTTP.
The HTTP cannot run at TCP port 443, and the HTTPS cannot run at TCP port 80.
Format
config wac switch_http_port <tcp_port_number 1-65535> {[http | https]}
Parameters
<tcp_port_number 1-65535> - A TCP port which the WAC switch listens to and uses to finish the
●
authenticating process. The range of port number is 1-65535.
http - (Optional) To specify the WAC runs HTTP protocol on this TCP port.
●
https - (Optional) To specify the WAC runs HTTPS protocol on this TCP port.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To config HTTP(s) port of the switch used by WAC:
EAS 200-24p:admin# config wac switch_http_port 8888 http
Command: config wac switch_http_port 8888 http
Success.
EAS 200-24p:admin#
882
Extreme Networks EAS 200-24p Switch CLI Manual