Show Device_Status - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 41: Peripherals Command List

show device_status

Description
This command displays current status of power(s) and fan(s) on the system.
Within fan(s) status display, for example, there are three fans on the left of the switch, if three fans is
working normally, there will display "OK" in the Left Fan field. If some fans work failed, such as fan
1,3, there will only display the failed fans in the Left Fan field, such as "1,3 Fail".
In the same way, the Right Fan, Back Fan is same to Left Fan. Because there is only one CPU Fan, if it is
working failed, display "Fail", otherwise display "OK".
Format
show device_status
Parameters
None.
Restrictions
None.
Example
To show device status, the number 1, 2, 3 etc represent the fan number:
EAS 200-24p:admin#show device_status
Command: show device_status
Internal Power: Active
External Power: Fail
Right Fan : OK
EAS 200-24p:admin#
600
Extreme Networks EAS 200-24p Switch CLI Manual