Chapter 5: Access Authentication Control Command List
config authen parameter attempt
Description
This command is used to configure the maximum attempts for user's trying to login or promote the
privilege on console, telnet, SSH application.
Format
config authen parameter attempt <int 1-255>
Parameters
attempt - The amount of attempts for user's trying to login or promote the privilege on console or
●
telnet or SSH. Default value is 3.
<int 1-255> - Enter the attempt amount here. This value must be between 1 and 255.
●
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the maximum attempts for user's trying to login or promote the privilege to be 9:
EAS 200-24p:admin# config authen parameter attempt 9
Command: config authen parameter attempt 9
Success.
EAS 200-24p:admin#
140
Extreme Networks EAS 200-24p Switch CLI Manual