Disabling Web Access; Using Snmp; Accessing System Agents - Extreme Networks BlackDiamond 6800 User Manual

A T S
CCESSING HE YSTEM
For more information on using ExtremeWare Vista, refer to
D W A
ISABLING EB
By default, Web access is enabled on the BlackDiamond. To disable it, enter the
following command:
disable web
To re-enable Web access, enter the following command:
enable web
Reboot the system in order for these changes to take effect.
For more information on rebooting the system, refer to
U SNMP
SING
Any Network Manager running the Simple Network Management Protocol (SNMP) can
manage the system, provided the Management Information Base (MIB) is installed
correctly on the management station. Each Network Manager provides its own user
interface to the management facilities.
The following sections describe how to get started if you want to use an SNMP
manager. It assumes you are already familiar with SNMP management. If not, refer to
the following publication:
The Simple Book
by Marshall T. Rose
ISBN 0-13-8121611-9
Published by Prentice Hall
A S
CCESSING YSTEM
In order to have access to the SNMP agent residing in the system, at least one VLAN
must have an IP address assigned to it.
For more information on assigning IP addresses, refer to
2-18
CCESS
A
GENTS
Chapter 12.
Chapter 13.
Table 2-3.
B
LACK
D U G
IAMOND SER UIDE