Led State Definitions; Front Panel Leds; Switch Led State Indicators - Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-PWR+ Installation Manual

LED state definitions

The figures and tables in the following sections describe the LEDs on the Virtual Services Platform
4000 Series switches. The tables describe LED operation for a switch that finishes the power-on
self-test.

Front panel LEDs

The following diagram illustrates the components on the front panels of the VSP 4450GSX-PWR+
switch.
For detailed explanations of the states indicated by each front panel LED type, see the following
sections:
• Port LED state indicators
•

Switch LED state indicators

Figure 7: VSP 4450GSX-PWR+
1. USB 2.0 port
2. Switch LEDs
3. 10/100/1000 Mbps RJ45 ports with PoE+ (LEDs above ports)
4. 100/1000 Mbps SFP ports
5. 1/10Gbps SFP+ ports
6. Console Port
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source.
Switch LED state indicators
The following table describes the main switch LED state indications provided by LED color and
fluctuation cues.
August 2018
on page 36
on page 35
Installing the Virtual Services Platform 4450GSX-PWR+
LED state definitions
35