Vrrp Priority - Dell Networking 7048 Reference Manual

Parameter
seconds
Default Configuration
Enabled is the default configuration. Delay defaults to 0 seconds.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
As per the VRRP RFC, when preemption is enabled, the backup router
discards the advertisements until the masterdowntimer starts. This feature
requires immediate sending of advertisements when the preemption case
occurs and the delay is 0. This is a violation according to the RFC 3768.
Delay, if configured, will cause the VRRP router to wait the specified number
of seconds before issuing an advertisement claiming master ownership.
Example
The following example sets the preemption mode value for the virtual router
for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#vrrp 5 preempt

vrrp priority

Use the vrrp priority command in Interface Configuration mode to set the
priority value for the virtual router configured on a specified interface. Use
the no form of the command to return the priority to the default value.
Syntax
group
vrrp priority
group
no vrrp
group — The virtual router identifier. (Range: 1-255)
•
1338
Virtual Router Redundancy Protocol Commands
Description
The number of seconds the VRRP router will wait before
issuing an advertisement claiming master ownership.
level
level
priority