Show Captive-Portal Status - Dell Networking 7048 Reference Manual

Example
console#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason................ Administrator Disabled
Captive Portal IP Address................. 1.2.3.4

show captive-portal status

Use the show captive-portal status command to report the status of all
captive portal instances in the system.
Syntax
show captive-portal status
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal status
Additional HTTP Port........................... 81
Additional HTTP Secure Port.................... 1443
Authentication Timeout......................... 300
Supported Captive Portals...................... 10
1371
Captive Portal Commands