Ip Vrrp Accept-Mode - Dell Networking 7048 Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example displays all statistical information about the VLAN 15
virtual router.
console#show vrrp interface stats vlan 15 5
UpTime..................... 0 days 0 hrs 0 mins 0 secs
Protocol....................................... IP
State Transitioned to Master................... 0
Advertisement Received......................... 0
Advertisement Interval Errors.................. 0
Authentication Failure......................... 0
IP TTL Errors.................................. 0
Zero Priority Packets Received................. 0
Zero Priority Packets Sent..................... 0
Invalid Type Packets Received.................. 0
Address List Errors ........................... 0
Invalid Authentication Type.................... 0
Authentication Type Mismatch................... 0
Packet Length Errors........................... 0
Pingable VRRP Commands

ip vrrp accept-mode

Use the ip vrrp accept-mode command in Interface (VLAN) Configuration
mode to enable the VRRP Master to accept ping packets sent to one of the
virtual router's IP addresses. Use the no form of the command to disable
responding to ping packets.
1350
Virtual Router Redundancy Protocol Commands